Jiangsu Zhongxinhe New Material Technology Co., Ltd.
Jiangsu Zhongxinhe New Material Technology Co., Ltd.
Add to Cart
3mm EPE Foam With Gold Film For Laminate Flooring With Silver Foil For Noise Reduction
Introduction:
EPE is a basic type of flooring underlay, it is an important moisture barrier and cushioning, it is also a very important ingredient in producing a floor with a quality sound. With foil backing will increase the property of thermal plus.
Suitable area:
Laminate floor, wood floor, engineered floor, hardwood floor, floating floor, sub-floors, etc.
| Roll Cover: | 18.6m2 |
| Roll Width: | 1100mm |
| Roll Overlap | 100mm |
| Thickness | 3mm |
| Moisture Resistance Foil | Goldend film |
| Material: | Polyethylene |
| Antimicrobial: | No |
| Moisture Resistant | Yes |
| Cushioning: | Yes |
| Commercial / Residential: | Residential |
How to Install
Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free of any foreign objects.
Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to keep it as even as possible across the room.
Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section using your scissors or utility knife.
Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping film on the previous section.
Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is flush up against the other piece of underlayment and on top of the overlapping film.
Step 6: Cut Section
Cut the next section of underlayment.