Jiangsu Zhongxinhe New Material Technology Co., Ltd.
Jiangsu Zhongxinhe New Material Technology Co., Ltd.
Add to Cart
1mm High Density Black EVA Foam For SPC Flooring
Introduction:
EVA foam is high density material with embossed film, which is normally used for SPC flooring, to overcome the minor subfloor imperfections and insulate the noise
Suitable area:
SPC floor, Laminate floor, wood floor, engineered floor, hardwood floor, floating floor, sub-floors, etc.
| Roll Cover: | 18.6m2 |
| Roll Width: | 1100mm |
| Roll Overlap | 100mm |
| Thickness | 1mm |
| Moisture Resistance Foil | Embossed Film |
| Material: | EVA |
| Antimicrobial: | No |
| Moisture Resistant | Yes |
| Cushioning: | Yes |
| Commercial / Residential: | Residential |
How to Install
Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free of any foreign objects.
Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to keep it as even as possible across the room.
Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section using your scissors or utility knife.
Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping film on the previous section.
Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is flush up against the other piece of underlayment and on top of the overlapping film.
Step 6: Cut Section
Cut the next section of underlayment.